CAMBS TRIALS CENTRE

YAMAHA TY250R OWNERS MANUAL

If out of stock on the Web Store please give us a call, we have back

orders arriving daily.

TK CARB MAIN JET EMULSION TUBE

GENUINE YAMAHA PART 

NO LONGER AVAILABLE FROM YAMAHA

PART NUMBER  53Y-14341-00 & 4GG-14341-00 .THIS PART IS COMPATIBLE FOR ALL TY250 / 350  (INC TYZ 250) MONO MODELS  ALL YEARS . WE ALSO HAVE MAIN AND IDLE JETS ASWELL AS EMULSION    TUBE O RINGS IN STOCK  

 £35.00

 Please click on the photo above to purchase these

Brand New Yamaha TY250 / TY350 GENUINE WHITE FRONT MUDGUARD

Yamaha Part Number 4AJ-21511-00

This Mudguard is brand new in its original Yamaha packaging and will fit all models and years of the TY250 and TY350 Mono-shock

 £74.50

                                                                                                   Please click on the photo above to purchase these

Brand New Yamaha TY250 / TY350 GENUINE WHITE REAR MUDGUARD

Yamaha Part Number 44J-21610-00

This Mudguard is brand new in its original Yamaha packaging and will fit all models and years of the TY250 and TY350 Mono-shock

We also sell the rubber mudguards flaps, you can find these in our other items.

£79.50

                                                                                              Please click on the photo above to purchase these

CTC VENHILL TY MONO TK TO DOMINO THROTTLE CABLE

THIS CABLE HAS BEEN CUSTOM MADE TO CONVERT FROM 

A STANDARD THROTTLE BODY TO A DOMINO FAST OR 

SLOW ACTION THROTTLE BODY.

£22.50 

please click on photo to buy

IGNITION COIL 

To fit TY Mono 

£19.99

To buy this item click on the photo 

NGK LB05EMH ELBOW SPARK PLUG CAP

Universal part for most bikes. 

Available in red or black through the webstore

£6.50

please click on photo to purchase

CLUTCH BASKET LOCKING WASHER

YAMAHA PART NUMBER  90215-20212

£7.50 

please click on photo to purchase

YAMAHA TY250 / TY350 MONO FRONT WHEEL 

BEARING COVER

YAMAHA PART NUMBER  322-25118-00

£3.15

please click on photo to purchase

BARREL DOWELL 

Yamaha part number 99530-14016

Yamaha TY 250 Mono Bikes all models and years 

£6.30 

please click on photo to purchase 

CARB DRAIN PLUG O RING 

Yamaha Part Number 38V-14397-00

OUR PRICE £5.50

please click on photo to purchase 

 ALUMINIUM TOP STEM BOLT

Aerospace Grade CTC Aluminium Top Yoke Bolt.

These will fit all TY Twin shock and air-cooled Bikes as well as the TYZ 250 Water cooled Mono.

 Weighing in at just 20 grams compared to 65 grams of the Yamaha original Steel Stem Bolt. If combined with our Lightweight Aluminium Steering Stem there is a weight saving of 310 grams compared to the original Stem & Bolt.

OUR PRICE £15.00 

Please click on the photo to purchase 

TY MONO TOP FORK BUSH

Genuine Yamaha Part

OUR PRICE £10.50

Please click on the photo  to purchase 

Pair of CTC Adjustable Fork Spring Pre-Loaders to fit the 

following bikes:

YAMAHA TY 250 MONO ALL YEARS

YAMAHA TY 350 MONO ALL YEARS

This Fork Spring Tension Pre-Loader kit allows you to accurately 

adjust the preload tension of the fork springs to your desired feel.

These are adjustable between 25mm to 135mm. (Standard fork 

spacers are 85mm).

These are for use with either original or aftermarket springs such 

as Magicals.

The photo shows a pre-loader at Max 135mm (Left) and Standard

85mm (Right)

Our Price £23.50 

Please click on the photo above to purchase this item

CLUTCH ARM RETURN SPRING

Reproduced part as original part is no longer available from Yamaha.

Made from top quality stainless steel spring wire to OEM Spec. 

OUR PRICE £10.00

Please click on the photo  to purchase one of these

ALLOY STEERING YOKE STEM

Reproduced part as original part is no longer available

from Yamaha.

OUR PRICE £50.00

                                                                                            Please click on the photo to purchase one of these

YAMAHA FRONT BRAKE CABLE / HOSE GUIDE

Yamaha TY250 / 350 Mono Bikes 1984 - 1992

Yamaha Part Number 3R4-23317-00

OUR PRICE £11.00

Please click on the photo to purchase one of these

COMPLETE CON ROD KIT

to fit all Yamaha TY250 Mono's - 

TY250S,

TY250R, TY250R Pinky, 1983-1992

Unlike other cheaper aftermarket kits this kit has the correct length

Crankshaft Big End Pin the same as Genuine Yamaha Kit

 £105.99 

Please click on the photo to purchase one of these

Custom made Large volume High Performance Yamsport Aluminium Rear Silencer to fit the following Bikes.

Yamaha TY250S

Yamaha TY250R

Yamaha TY250 Pinky

Yamaha TY350 Mono All

These have been remade to fit the above bikes using the original Mick Andrews pressing forms modified to fit a modern CNC Press.

These are being remade using the Yamsport name with permission directly from Mick Andrews and have been enhanced beyond the original mk2 spec with guidance from Mick Andrews as to where these improvements could be made.

The original Yamsport silencers were made for the Hamilton and Factory Yamaha Team bikes and are one of the only silencers to improve the performance of the TY Mono.

This silencer gives the bike a lovely deep note to the exhaust and increases bottom end torque as well as allowing the bike to rev out cleanly at the top end.

These are hand made here in the UK at Cambs Trials Centre and have been manufactured using only the latest and best quality materials.

They have a large stainless steel perforated tube and silent sport packing inside the silencer and will produce a lovely deep note.

These silencers are made to order, so please allow up to 10 days for delivery 

OUR PRICE £175.00 

Please click on the photo above to purchase one of these

Wossner Piston Kit for the Yamaha TY Mono 1984 - 1992

This kit comes complete with a Teflon coated Piston, Rings,

Gudgeon Pin & Gudgeon pin Circlips as in the photo.

These are available in 68mm (Standard 250) +0.5mm, +1.0mm,

+1.5mm & +2.0mm (Please specify at checkout which size you

require)

R.R.P. £199.99

OUR PRICE £160.00

Please click on the photo to purchase one of these

These New Lightweight 7075 T6 5mm Ergal Flat Sump Plates have

been custom made to fit the TY250/350 Mono's

They have been made to offer great protection of the engine cases

whilst allowing easy access to remove the engine casings and to

drain the oil without the need of removing the sump plate.

Being made from Aerospace grade aluminium they are lighter than

the original sump plates whilst being stronger at the same time.

With being flat they will not throw the bike to one side when you

land on an object as the std ones do.

The Sump Plate and mounting holes have been laser cut for

accuracy then CNC bent to the perfect shape giving approx 5mm of

clearance between the plate and engine.

OUR PRICE £109 

Please click on the photo  to purchase one of these

This Service Kit includes the following items:

1 x 520 x 102 Link Regina Extra Gold link HD Chain.

1 x Talon 10 Tooth Front Sprocket.

1 x Talon 35 Tooth (4 Bolt) Rear Sprocket in Gold.

1 x 1 Litre Bottle of Putoline Light Gear Oil.

1 x 1 Litre Bottle of Putoline TT Trial Pro Two-Stroke Pre-Mix Oil.

1 x NGK BR6ES Spark Plug

1 x Twin Air two Stage Air Filter.

2 x Rear Wheel Bearings.

2 x Front Wheel Bearings.

Putoline stickers.

R.R.P. £123.98

Special Offer Price £99.99

Please click on the photo  to purchase one of these

CTC Lightweight Aerospace Grade Aluminium Top Yoke with Handlebar Clamps to fit the Yamaha TY250 / 350 Mono R, S & Pinky models From 1984-1992

This Top Yoke has been CNC'd from 7075 T6 Ergal Aluminium

which is not only very light but also extremely strong. 

This Top Yoke comes with a set of interchangeable Standard or

Fatbar Handlebar clamps CNC'd from the same material. (please

choose at checkout which option you would like).

These Yokes come with new Stainless Steel fixing Bolts included.

These come in an mill finish but can be polished for only £10 extra. 

OUR PRICE £199.00 

Please click on the photo to purchase one of these

This new Lightweight Aerospace Grade Alloy spindle set 

comprises of a new Rear Spindle with matching locking nut.

A Swinging arm spindle with a set of quality needle roller bearings,

nylon bushes and seals and matching locking nut.

A front spindle with spacer to replace the speedo drive, also a new

seal to seal the spacer into the hub and protect the wheel bearing.

These Spindles can also be purchased separately.

OUR PRICE £145 

Please click on the photo to purchase one of these

CNC'd Lightweight Aerospace Grade Alloy Front Wheel Spindle complete with a Spacer to replace the Speedo Drive unit and also a seal to go into the hub on the spacer side to seal the bearing.

This Front Wheel Spindle is very strong at the same time being less than half the weight of the original Steel spindle.

OUR PRICE £50 

Please click on the photo to purchase one of these

This Conversion Kit allows you to change the throttle body to a

modern type Domino one.

The Kit comprises of the following items:

A Custom made Venhill Featherlite Throttle Cable to fit between the

standard TK Carb and the new Domino Throttle Body.

A Domino Throttle Body - Available in either Fast or Slow Action.

A Set Of Domino Dual Compound Trials Grips with built in hard

ends - available in Black/Grey, Black/Red, White/Black or

Blue/White

OUR PRICE £52 

Please click on the photo to purchase one of these

New Custom Made spring set for the Rear brake arms of the

TY250/350 Mono's.

These have been made from slightly thicker material than the

originals and have also been made with slightly longer arms to put

better tension on the rear brake arms to eliminate the rear brake

sticking on, which is a common fault with the TY Mono rear brake.

These come as a set of two springs, one for the rear brake pedal

arm and one for the rear brake arm on the hub.

OUR PRICE £17.00 

Please click on the photo to purchase a set of these

New Custom Made Carbon Fibre Performance Reeds to fit the

TY250/350 Mono.

These reeds will outperform the std reeds and help to make the

throttle response crisper and allow the engine to rev out cleanly.

These come as a set of TWO Reeds.

OUR PRICE £50 

Please click on the photo to purchase a set of these

These Rubber Mudguard flaps have reproduced from 

3mm Nitrile (Chemical resistant) Rubber to the exact 

same shape as 

the original part.

They are held onto the mudguard with 4 strong panel clips

(Supplied)

Our Price £20.00 

Please click on the photo to purchase on of these

This is an After-market Custom Part that fits the TY250 Mono

Perfectly.

It sits inboard of the casing with only a small part of the folding end

exposed as you can see in the photo on the right above.

These very trick levers come in an anodised silver

finish but can be polished for a small additional

charge.

OUR PRICE £45 

Please click on the photo to purchase through the webstore 

Stainless steel Custom Brake pedal to fit the Yamaha TY250R & S models that have had the footrests lowered. 

These Brake pedals are done on an exchange basis. You simply place your order, send me your old brake pedal and splined shaft. I carefully remove the splined shaft and re-weld it into the new Stainless Steel brake pedal. This ensures that the splined shaft fits exactly back into your frame the way it was. When done, i will send it back to you as a finished piece, all you have to do is fit it back on the bike.

These Brake pedals are laser cut from 6mm Stainless Steel and have a very trick Alloy folding end attached to them. The folding end pieces come with tiny Stainless studs in them for grip under you toe whilst braking. They come in a choice of Black, Red or Blue and the lever can be polished or shotblasted to be painted a colour of your choice when you get it back.

It sits absolutely perfectly inside the casing so only the very tip is exposed, and is in an ideal position for your foot - Please see the photos above.

                                                                                                 Our Price £60.00

                                                                                                 To buy this item click on the photo 

CTC Precision Laser Cut 6mm Polished Aluminium

Chain Guide / Case Saver to fit the TY250 Mono's.

Our Price £23.50

To buy this item click on the photo 

TY MONO "PINKY" PLAIN REAR MUDGUARD 

These reproduction Pinky Rear mudguards are now available to

buy exclusively from us at Cambs Trials Centre.

You are purchasing a plain Pink Mudguard, the decals and rubber

flaps are available separately.

We are offering these mudguards at an amazing

price of just £60 each or on a special offer or

two for £100.

If you wish to take advantage of this special offer you will need to

contact us directly on 07770670696 to place the order.

Please click on the photo above to purchase one of these

This is a New complete Custom after-market Alloy

Kickstart lever that fits the TY250 Mono Perfectly.

This is a direct replacement for the original Kickstart.

It is slightly shorter and sits very nicely in the gap in 

the Barrel fins.

Our Price £90 

Please click on the photo to purchase this item

These are Custom Hand Made 304 Stainless Steel Side Stand

Assemblies for the TY250 Mono where the side stand is mounted on the top left hand side of the swinging arm. 

They come as a complete kit including new Bracket, Stand, Spring and fixing bolts & washers. Everything is made from Stainless Steel and is manufactured to the highest quality.

These side stands have been designed to sit parallel along the

swinging arm, clearing the snail cams and rear brake arm.

The Side Stand assembly comes in a brushed stainless finish.

Individual parts of the assembly are available upon request (Please call Paul on 07770 670696)

These complete Stainless Steel side stand assemblies are just

£129.99 

Please click on the photo above to purchase on of these

TK CARBURETOR CHOKE ASSEMBLY

Brand New Genuine OEM Yamaha TK Carburetor Choke 

assembly

This is the complete Choke assembly to fit the TK carb fitted all of

the TY250/350 Mono Bikes

Our Price £43.06

To buy this item click on the photo 

OEM NOS YAMAHA CARBURETOR COVER

OEM NOS Yamaha Carburetor Cover.

This stops water and muck getting ito the top of the carb.

This will fit many different bikes with round carburetor tops as it is

rubber and will stretch.

Our Price £36.50

To buy this item click on the photo 

BEARING & SEAL KIT

Top quality aftermarket bearing and seal kit for all TY Monos

250/350 including Pinkys.

Our Price £26.00

To buy this item click on the photo 

TY MONO COMPLETE FUEL TAP

Genuine Yamaha OEM complete Fuel Tap Assembly for all models fitted with a 

plastic tank. 

This Fuel Tap comes with a brand new seal (Not Shown)

OUR PRICE £38.00

To buy this item click on the photo 

This Rear Linkage Relay Arm Bush Kit has all of the solid bushes found in the linkage relay arm and lower shock mount.

The Bushes which are no longer available from Yamaha have been re-manufactured to OE Specification using 316 Stainless Steel, so they will never rust away again.

This kit contains the two front and single rear relay arm Solid Bushes that have the Grease holes and recess. 

It also contains the solid Bush which is in the rear shock Lower Linkage

These are £48.00 

To buy this item click on the photo 

CTC Yamaha TY250/350 Mono Rear Linkage Bolt.

This replaces part numbers 55, 40, 41 and 42 on the parts diagram above and comes complete with the grease nipple, Nylock Nut and washer.

This Linkage Bolt is no longer available from Yamaha, so we have been re-manufactured to OE Specification using 316 Stainless Steel, so they will never rust away again.

We also have complete linkage Bush, Bearing, Seal and bolt kits available.

OUR PRICE £27.50

To buy this item click on the photo 

CTC REPLICA TY MONO SWINGING ARM CHAIN SLIPPER

These have been re-produced especially for us at CTC using a epoxy resin plastic making them very durable and a perfect match for the original.

Limited quantity available. 

OUR PRICE £28.00

YAMAHA AIR FILTER CAGE STRAP

These fit all of the TY250/350 Mono Bikes from 1988 - 1992

Yamaha Part Number 133-82131-00

OUR PRICE £10.50

FRONT SPROCKET LOCKING NUT TAB WASHER

Genuine OEM Yamaha TY250/350 Mono Front Sprocket Locking Nut Tab Washer

These are £4.55

To buy this item click on the photo 

BRAKETEC FRONT BRAKE MASTER CYLINDER

We have Braketec Front Brake Master Cylinders to fit the Yamaha TY250 R / 

S  (1984 - 1992) in stock. Very good upgrade from the Standard master 

cylinder found on the "Pinky"

These are £114.60 

To buy this item click on the photo 

YAMAHA TY MONO REAR BRAKE CABLE 

Custom made Rear Brake Cable Assembly to Fit the Yamaha TY250 / 350 Mono bikes 1984 - 1992.

This part has been exclusively re-manufactured for us at Cambs Trials Centre to the same OEM specification to the original cable apart from it now has a steel nipple on the brake pedal end so it wont wear like the original brass ones. 

This comes complete with the Cable, Tension Spring, Tension Pin and Locking Wing Nut as seen in the photo above.

These are £39.00

To buy this item click on the photo 

 TALON REAR SPROCKETS

We have Talon Radialite (Self Cleaning) Rear Sprockets to fit the Yamaha TY250R / S in stock.

These are 35 tooth, 520 Pitch sprockets finished in a gold anodised colour as seen in the photo.

These are £32.00 

To buy this item click on the photo 

TY MONO FORK SEALS

Brand New Top Quality OEM Specification Yamaha Fork Seals

These fit all of the TY250/350 Mono Bikes from 1988 - 1992

These are £18.00 

To buy this item click on the photo 

TY MONO EXHAUST STUD BOLT 

Yamaha Part Number 90116-08042

OUR PRICE £3.49

To Buy This Item Please Click on the Photo 

TY MONO CYLINDER HEAD STUD BOLT 

Yamaha Part Number 90116-08394

OUR PRICE 6.95

To Buy This Item Please Click on the Photo 

TY MONO MAIN JET WASHER

Yamaha Part Number 38V-14153-00

OUR PRICE £4.00

To Buy This Item Please Click on the Photo