CAMBS TRIALS CENTRE

TEL: 07770 670696

   YAMAHA TY MONO PARTS

We now have in stock almost all of the New Genuine Yamaha

parts for the Yamaha TY250/350 Mono's from 1984 - 1992, as well

as many high quality used parts.

As well many after market parts that we are remanufacturing and

high quality used Yamaha parts.

Not all of these parts have been listed as yet... 

If you cannot find what you are looking for below please call us on

07770 670696 as we will probably have what you need.

More items are being added all the time 

 CUSTOM MADE LARGE VOLUME HIGH PERFORMANCE                        YAMSPORT ALUMINIUM REAR SILENCER

Custom made Large volume High Performance Yamsport Aluminium Rear Silencer to fit the following Bikes.

Yamaha TY250S

Yamaha TY250R

Yamaha TY250 Pinky

Yamaha TY350 Mono All

These have been remade to fit the above bikes using the original Mick Andrews pressing formes modified to fit a modern CNC Press.

These are being remade using the Yamsport name with permission directly from Mick Andrews and have been enhanced beyond the original mk2 spec with guidance from Mick Andrews as to where these improvements could be made.

The original Yamsport silencers were made for the Hamilton and Factory Yamaha Team bikes and are one of the only silencers to improve the performance of the TY Mono.

This silencer gives the bike a lovely deep note to the exhaust and increases bottom end torque as well as allowing the bike to rev out cleanly at the top end.

These are hand made here in the UK at Cambs Trials Centre and have been manufactured using only the latest and best quality materials.

They have a large stainless steel perforated tube and silent sport packing inside the silencer and will produce a lovely deep note.

These silencers are made to order, so please allow up to 10 days for delivery 

 

OUR PRICE £175.00 inc UK P&P

 Please click on the photo above to purchase one of these

  WOSSNER TY 250 MONO PISTON KIT

 

Wossner Piston Kit for the Yamaha TY Mono 1984 - 1992

This kit comes complete with a Teflon coated Piston, Rings,

Gudgeon Pin & Gudgeon pin Circlips as in the photo.

These are available in 68mm (Standard 250) +0.5mm, +1.0mm,

+1.5mm & +2.0mm (Please specify at checkout which size you

require)

 OUR PRICE £99.95

 Please click on the photo above to purchase one of these

       NEW TY  MONO 7075 T6 FLAT ALLOY SUMP PLATE

These New Lightweight 7075 T6 5mm Ergal Flat Sump Plates have

been custom made to fit the TY250/350 Mono's

They have been made to offer great protection of the engine cases

whilst allowing easy access to remove the engine casings and to

drain the oil without the need of removing the sump plate.

Being made from Aerospace grade aluminium they are lighter than

the original sump plates whilst being stronger at the same time.

With being flat they will not throw the bike to one side when you

land on an object as the std ones do.

The Sump Plate and mounting holes have been laser cut for

accuracy then CNC bent to the perfect shape giving approx 5mm of

clearance between the plate and engine.

 

OUR PRICE £129 inc UK P&P

Please click on the photo above to purchase one of these

YAMAHA TY MONO SERVICE KIT (1984 - 1992)

This Service Kit includes the following items:

1 x 520 x 102 Link Regina Extra Gold link HD Chain.

1 x Talon 10 Tooth Front Sprocket.

1 x Talon 35 Tooth (4 Bolt) Rear Sprocket in Gold.

1 x 1 Litre Bottle of Putoline Light Gear Oil.

1 x 1 Litre Bottle of Putoline TT Trial Pro Two-Stroke Pre-Mix Oil.

1 x NGK BR6ES Spark Plug

1 x Twin Air two Stage Air Filter.

2 x Rear Wheel Bearings.

2 x Front Wheel Bearings.

Putoline stickers.

R.R.P. £123.98


Special Offer Price £95.99

 Please click on the photo above to purchase one of these

CTC LIGHTWEIGHT ALUMINIUM TOP YOKE WITH HANDLEBAR CLAMPS

    

CTC Lightweight Aerospace Grade Aluminium Top Yoke with Handlebar Clamps to fit the Yamaha TY250 / 350 Mono R, S & Pinky models From 1984-1992

This Top Yoke has been CNC'd from 7075 T6 Ergal Aluminium

which is not only very light but also extremely strong. 

This Top Yoke comes with a set of interchangeable Standard or

Fatbar Handlebar clamps CNC'd from the same material. (please

choose at checkout which option you would like).

These Yokes come with new Stainless Steel fixing Bolts included.

These come in an mill finish but can be polished for only £10 extra.

 

OUR PRICE £199.00 inc UK P&P

 

Please click on the photo above to purchase one of these

 

        NEW TY MONO ALLOY SPINDLE KIT

This new Lightweight Aerospace Grade Alloy spindle set comprises

of a new Rear Spindle with matching locking nut.

A Swinging arm spindle with a set of quality needle roller bearings,

nylon bushes and seals and matching locking nut.

A front spindle with spacer to replace the speedo drive, also a new

seal to seal the spacer into the hub and protect the wheel bearing.

These Spindles can also be purchased separately.

 

OUR PRICE £145 inc UK P&P.

 

Please click on the photo above to purchase one of these

YAMAHA TY250/350 MONO FRONT BRAKE - 

DRUM TO DISC CONVERSION KIT

Yamaha TY250/350 Mono Front Brake - 

Drum to Disc conversion Kit.

This Kit comes with the following items:

1 x New "Shirty" disc front wheel hub with new bearings

1 x "Shirty" Brake caliper Bracket to fit Drum Fork Leg

1 x New "Shirty" Front Brake Disc

1 x AJP 4-pot front Brake Caliper with pads

1 x AJP Front Brake Master Cylinder

1 x Venhill Front Brake Line

1 x 10mm Banjo Bolt with Bleed Nipple

All parts are brand new and never been used.

Due to the value of this item it will be sent via courier.

 

OUR PRICE £349.00

Please click on the photo above to purchase a set of these

 

           TY MONO OHLINS REAR SHOCK

      

We have the Custom made Ohlins rear shock absorber now available. These are made to order, usually within 14 days of ordering.

These have been developed to offer the best

rear damping on the Yamaha TY250R.

They come with the option of a 75, 80 or 90 nm Spring my suit your individual weight.

As Used on the CTC Pinky.

These are £475.00 each inc. Vat

To buy this item click on the photo above

 

  CTC MK 2 HAGON REAR SHOCK ABSORBER

 

We have the Custom made MK 2 Hagon rear shock absorber in stock.

These were developed by Chris Koch and Hagon to fit and improve

the rear damping on the Yamaha TY250R.

 They offer better and more responsive damping to your bike.

These are £350.00 each inc. Vat & Free UK P&P

To buy this item click on the photo above

 

                  COMPLETE CON ROD KIT

Complete Con Rod Kit to fit all Yamaha TY250 Mono's - TY250S,

TY250R, TY250R Pinky, 1983-1992

Unlike other cheaper aftermarket kits this kit has the correct length

Crankshaft Big End Pin the same as Genuine Yamaha Kit

 

OUR PRICE £105.99 inc UK P&P

Please click on the photo above to purchase one of these

    ALLOY FRONT WHEEL SPINDLE WITH SPACER & SEAL

CNC'd Lightweight Aerospace Grade Alloy Front Wheel Spindle complete with a Spacer to replace the Speedo Drive unit and also a seal to go into the hub on the spacer side to seal the bearing.

This Front Wheel Spindle is very strong at the same time being less than half the weight of the original Steel spindle.

 

OUR PRICE £50 inc UK P&P

 

Please click on the photo above to purchase one of these

      DOMINO THROTTLE CONVERSION KIT

This Conversion Kit allows you to change the throttle body to a

modern type Domino one.

The Kit comprises of the following items:

A Custom made Venhill Featherlite Throttle Cable to fit between the

standard TK Carb and the new Domino Throttle Body.

A Domino Throttle Body - Available in either Fast or Slow Action.

A Set Of Domino Dual Compound Trials Grips with built in hard

ends - available in Black/Grey, Black/Red, White/Black or

Blue/White

 

OUR PRICE £52 inc UK P&P

Please click on the photo above to purchase one of these

        TY MONO CUSTOM REAR BRAKE ARM SPRING SET

New Custom Made spring set for the Rear brake arms of the

TY250/350 Mono's.

These have been made from slightly thicker material than the

originals and have also been made with slightly longer arms to put

better tension on the rear brake arms to eliminate the rear brake

sticking on, which is a common fault with the TY Mono rear brake.

 

These come as a set of two springs, one for the rear brake pedal

arm and one for the rear brake arm on the hub.

 

OUR PRICE £17.00 inc. UK P&P

Please click on the photo above to purchase a set of these

TY MONO SM PRO PLATINUM GOLD        FRONT & REAR RIMS

Brand New Pair of Gold SM Pro Tubed Type rims to fit a Yamaha

TY Mono.

These consist of 1 x 36 holed 1.6 X 21 front rim and 1 x 32 holed

2.15 X 18 Rear Rim.

SM Pro Platinum Rims are made from 7050 series aluminium,

independant tests have shown the SM Pro Platinum rim to be both

stronger and lighter than the Excell A60 and Takasago rims,

making them probably the strogest and lightest rims on the market,

these are available in a range of hard anodised colours.

We are stocking thes rims in Black, Gold and Silver to fit this bike.

These may also fit many other bikes with 32 holed rear & 36 holed

front rim configuration.

 

OUR PRICE £230 inc UK Economy Delivery 

Please click on the photo above to purchase a set of these

TY MONO SM PRO PLATINUM BLACK FRONT & REAR RIMS

 

Brand New Pair of Black SM Pro Tubed Type rims to fit a Yamaha

TY Mono.

These consist of 1 x 36 holed 1.6 X 21 front rim and 1 x 32 holed

2.15 X 18 Rear Rim.

SM Pro Platinum Rims are made from 7050 series aluminium,

independant tests have shown the SM Pro Platinum rim to be both

stronger and lighter than the Excell A60 and Takasago rims,

making them probably the strogest and lightest rims on the market,

these are available in a range of hard anodised colours.

We are stocking thes rims in Black, Gold and Silver to fit this bike.

These may also fit many other bikes with 32 holed rear & 36 holed

front rim configuration.

 

OUR PRICE £230 inc UK Economy Delivery 

Please click on the photo above to purchase a set of these

 

TY MONO SM PRO PLATINUM SILVER FRONT & REAR RIMS

 

 

Brand New Pair of Silver SM Pro Tubed Type rims to fit a Yamaha

TY Mono.

These consist of 1 x 36 holed 1.6 X 21 front rim and 1 x 32 holed

2.15 X 18 Rear Rim.

SM Pro Platinum Rims are made from 7050 series aluminium,

independant tests have shown the SM Pro Platinum rim to be both

stronger and lighter than the Excell A60 and Takasago rims,

making them probably the strogest and lightest rims on the market,

these are available in a range of hard anodised colours.

We are stocking thes rims in Black, Gold and Silver to fit this bike.

These may also fit many other bikes with 32 holed rear & 36 holed

front rim configuration.

 

OUR PRICE £230 inc UK Economy Delivery 

Please click on the photo above to purchase a set of these

 

           TY MONO CARBON FIBRE PERFORMANCE REEDS

New Custom Made Carbon Fibre Performance Reeds to fit the

TY250/350 Mono.

These reeds will outperform the std reeds and help to make the

throttle response crisper and allow the engine to rev out cleanly.

These come as a set of TWO Reeds.

 

OUR PRICE £50 inc UK P&P

Please click on the photo above to purchase a set of these

    NEW TY MONO ALLOY REAR SPINDLES

New Aerospace Grade Alloy Rear Sindle to fit the

Yamaha TY 250/350 Mono.

 

OUR PRICE £45 Each inc UK P&P 

Please click on the photo above to purchase one of these

         STAINLESS STEEL SPOKES TO FIT A PINKY TYPE DISC FRONT WHEEL

A set of Stainless Steel Spokes Custom made to fit the TY250

Pinky Front rim with Disc brake hub.

 

These will fit either the standard or modern Morad type rims.

 

These come as a complete set of 36 spokes with nipples

 

Please call 07770670696 to order these.

 TY MONO STAINLESS STEEL "Z" SPOKE SET

 

A set of Stainless Steel "Z" Spokes Custom made to fit the TY250

Mono Rear Wheel.

These are available to fit either the standard or modern Morad type

Tubeless rims.

These come as a complete set of 16 spokes with nipples

 

Please call 07770670696 to order these.

         TY MONO "PINKY" PLAIN PINK REAR MUDGUARDS

These reproduction Pinky Rear mudguards are now available to

buy exclusively from us at Cambs Trials Centre.

You are purchasing a plain Pink Mudguard, the decals and rubber

flaps are avialable seperately.

These Mudguards have been produced from colour matched

plastic as you can see from the photo below.

We are offering these mudguards at an amazing

price of just £60 each or on a special offer or

two for £100.

If you wish to take advantage of this special offer you will need to

contact us directly on 07770670696 to place the order.

Please click on one of the photos above to purchase one of these

 TY MONO PINKY REAR MUDGUARD DECALS

These Decals have been reproduced from high quality White

Cast Vinyl

and come in a matched pair (one for each side of the mudguard)

Our Price £15 plus P&P

Please click on one of the photos above to purchase one of these

            TY MONO REAR MUDGUARD RUBBER FLAPS

These Rubber Mudguard flaps have reproduced from 3mm Nitrile

(Chemical resistant) Rubber to the exact same shape as the

original part.

They are held onto the mudguard with strong panel clips (Supplied)

Our Price £20.00 plus P&P

Please click on one of the photos above to purchase on of these

    GENUINE YAMAHA CYLINDER ANTI VIBRATION RUBBER

 

Genuine OEM Yamaha Cylinder Anti Vibration Rubber

These stop the Fins on the Air cooled Cylinder from vibrating and resonating when the engine is revved.

Price is for One Rubber (4 are required for complete replacement)

 These are fitted to all of the TY 250/350 Mono Bikes ALL YEARS

OUR PRICE £9.64

Please click on the photo above to purchase

        TY MONO SHORT ALLOY FOLDING GEAR LEVER

 

This is an After-market Custom Part that fits the TY250 Mono

Perfectly.

It sits inboard of the casing with only a small part of the folding end

exposed as you can see in the photo on the right above.

These very trick levers come in an anodised silver

finish but can be polished for a small additional

charge.

 

OUR PRICE £45 Plus P&P

Please click on one of the photos above to purchase on of these

   STAINLESS STEEL CUSTOM BRAKE PEDAL

  

Stainless steel Custom Brake pedal to fit the Yamaha TY250R & S models that have had the footrests lowered. 

These Brake pedals are done on an exchange basis. You simply place your order, send me your old brake pedal and splined shaft. I carefully remove the splined shaft and re-weld it into the new Stainless Steel brake pedal. This ensures that the splined shaft fits exactly back into your frame the way it was. When done, i will send it back to you as a finished piece, all you have to do is fit it back on the bike.

These Brake pedals are laser cut from 6mm Stainless Steel and have a very trick Alloy folding end attached to them. The folding end pieces come with tiny Stainless studs in them for grip under you toe whilst braking. They come in a choice of Black, Red or Blue and the lever can be polished or shotblasted to be painted a colour of your choice when you get it back.

It sits absolutely perfectly inside the casing so only the very tip is exposed, and is in an ideal position for your foot - Please see the photos above.

These come in a shotblasted Stainless finish but can be fully polished for only £5 extra.

 

Our Price £60.00

To buy this item click on the photo above

 

       TY MONO ALLOY KICKSTART LEVER

This is a New complete Custom after-market Alloy

Kickstart lever that fits the TY250 Mono Perfectly.

This is a direct replacement for the original Kickstart.

It is slightly shorter and sits very nicely in the gap in the

Barrel fins.

The Kickstart Levers are available in either a polished finish as in

the photo or Painted Satin Black.

Please specify which colour you would like. 

Our Price £90 plus P&P 

Please click on the photo above to purchase this item

      TY MONO CHAIN GUIDE / CASE SAVER

CTC Precision Laser Cut 6mm Polished Aluminium

Chain Guide / Case Saver to fit the TY250 Mono's.

Our Price £23.50 

To buy this item click on the photo above

                 CTC ADJUSTABLE FORK SPRING PRE-LOADERS

Pair of CTC Adjustable Fork Spring Pre-Loaders to fit the following bikes:

YAMAHA TY 250 MONO ALL YEARS

YAMAHA TY 350 MONO ALL YEARS

This Fork Spring Tension Pre-Loader kit allows you to accurately adjust the preload tension of the fork springs to your desired feel.

These are adjustable between 25mm to 135mm. (Standard fork spacers are 85mm).

These are for use with either original or aftermarket springs such as Magicals.

The photo shows a pre-loader at Max 135mm (Left) and Standard 85mm (Right)

Our Price £23.50 

Please click on the photo above to purchase this item

 

   TY MONO STAINLESS STEEL SIDE STAND

These are Custom Hand Made 304 Stainless Steel Side Stand

Assemblies for the TY250R.

They come as a complete kit including new Bracket, Stand, Spring

and fixing bolts & washers. Everything is made from Stainless Steel

and is manufactured to the highest quality.

 

The stand springs are an original Yamaha Part and are zinc plated,

the bolts and washers are A2 Stainless Steel.

These side stands have been designed to sit parallel along the

swinging arm, clearing the snail cams and rear brake arm.

The Side Stand assembly comes in a brushed stainless finish, or

for an extra £10 we will give it a mirror polished finished as shown

in the photos above.

Individual parts of the assembly are available upon request

(Please call Paul on 07770 670696)

The CTC Side stand Bracket has been made slightly longer than

the original standard bracket to allow for the side stand to be fitted

on the inside or outside of the swinging arm.

The original side stand parts which are no longer available from

Yamaha used to cost £145.50.

These complete Stainless Steel side stand assemblies are just

£99.99 plus P&P.

Please click on one of the photos above to purchase on of these

           ALUMINIUM IGNITION CASE / COVER

New Re-Manufactured CTC Aluminium Ignition Case / Cover

To Fit All TY 250 / 350 Mono Bikes from 1984 - 1992

These Ignition Cases / Covers have been cast from aluminium to the exact same specification as the original Yamaha part which is no loger available.

These cases are available in either Pinky Sliver or Satin Black. They have a colour matched powder coat finish.

Please allow up to 10 days for this item to be delivered to you as they are hand finished and then powder coated.

 

Our Price £109.00

To buy this item click on the photo above

 

                   TY MONO IGNITION COIL


A brand new after market ignition coil to fit the TY250 Mono's

Our Price £18.99

To buy this item click on the photo above

        OEM YAMAHA TK CARBURETA CHOKE ASSEMBLY

 

Brand New Genuine OEM Yamaha TK Carburetor Choke assembly

 This is the complete Choke assembly to fit the TK carb fitted all of

the TY250/350 Mono Bikes

Our Price £43.06

To buy this item click on the photo above

 

          OEM NOS YAMAHA CARBURETA COVER

OEM NOS Yamaha Carburetor Cover.

This stops water and muck getting ito the top of the carb.

This will fit many different bikes with round carburetor tops as it is

rubber and will stretch.

 

Our Price £36.50

To buy this item click on the photo above

      TY MONO CHAIN TENSIONER ROLLER

 

A Brand new complete after market chain tensioner roller to fit the

TY250 Mono's

 Our Price £18.50

To buy this item click on the photo above

                                     FLYWHEEL PULLER

Brand New Top Quality Flywheel Puller.

 These fit all of the TY 250 / 350 Mono Bikes from 1988 - 1992

 

Our Price £20.00

To buy this item click on the photo above

            YAMAHA FRONT BRAKE CABLE / HOSE GUIDE

Brand New Genuine OEM Yamaha Front Brake Cable / Hose Guide

To Fit All TY 250 / 350 Mono Bikes from 1984 - 1992

 

Our Price £14.50

To buy this item click on the photo above

               TY MONO CRANK SEAL SET

 

Genuine Yamaha OEM Crank Seal Set

 

Our Price £23.75

To buy this item click on the photo above

            TY MONO COMPLETE FUEL TAP

Genuine Yamaha OEM complete Fuel Tap Assembly

This Fuel Tap comes with a brand new seal (Not Shown)

OUR PRICE £33.85

To buy this item click on the photo above

 SWINGING ARM BEARING, BUSH & SEAL KIT

Genuine Yamaha OEM Swinging Arm Bearing, Bush & Seal Kit

 

Everything you need to replace all of the internals of the

Swinging arm.

 

We prefer to use a seal either side instead of a single seal on the

inside to prolong the life of all of the internals of the swinging arm.

(See photo Above Right)

(Seals are not genuine Yamaha, but are high quality aftermarket double lip seals)

Swinging Arm end caps and bushes also available seperately

(see below)

 

OUR PRICE £71.70

 

To buy this item click on the photo above

 TY MONO SWINGING ARM END CAPS/SEALS

Aftermarket Yamaha TY Mono Swinging Arm End Cap/Seal

Set of 2

 

OUR PRICE £20.00

To buy this item click on the photo above

           TY MONO SWINGING ARM BUSH

Genuine Yamaha OEM Swinging Arm Bush

2 required but Sold individually

 

OUR PRICE £12.00

 

To buy this item click on the photo above
 

                    DRIVE SHAFT OIL SEAL

Brand New Genuine Yamaha OEM TY250/350 Air-cooled Mono 1984-1992 Drive Shaft Oil Seal (The one behind the front Sprocket). 

Genuine Yamaha Part.

These are £6.10 

To buy this item click on the photo above


YAMAHA TY250/350 MONO REAR LINKAGE RELAY ARM SOLID BUSH KIT

Genuine OEM Yamaha TY250/350 Mono Rear Linkage Relay Arm Solid Bush Kit.

This Rear Linkage Relay Arm Bush Kit has all of the solid bushes found in the linkage relay arm and lower shock mount.

The Bushes which are no longer available from Yamaha have been re-manufactured to OE Specification using 316 Stainless Steel, so they will never rust away again.

This kit contains the two front and single rear relay arm Solid Bushes that have the Grease holes and recess. 

It also contains the solid Bush which is in the rear shock Lower Linkage

These are £48.00 

To buy this item click on the photo above

 

  HEAD-STOCK STEERING BEARINGS, SHELLS AND SEALS

Brand New Top Quality Set of Head-stock Steering Bearings,

Shells and Seals

 These fit all of the TY 250 / 350 Mono Bikes from 1988 - 1992

 

OUR PRICE £24.99

  To buy this item click on the photo above

 

REAR LINKAGE RELAY ARM CONNECTING ROD SOLID BUSH

 

   

Genuine OEM Yamaha TY250/350 Mono Rear Linkage Relay Arm Connecting Rod Solid Bush

This Rear Linkage Relay Arm Bush is located as Number 38 in the parts photo above.

This Bush has been re-manufactured to OE Specification using 316 Stainless Steel, so they will never rust away again.

 

OUR PRICE £12.00

                    To buy this item click on the photo above

 

REAR LINKAGE RELAY ARM CONNECTING ROD SOLID BUSH

  

Genuine OEM Yamaha TY250/350 Mono Rear Linkage Relay Arm Connecting Rod Solid Bush

This Rear Linkage Relay Arm Bush is located as Number 47 in the parts photo above.

This Bush has been re-manufactured to OE Specification using 316 Stainless Steel, so they will never rust away again.

OUR PRICE £12.00

                    To buy this item click on the photo above

 

     REAR SUSPENSION RELAY ARM BEARING & SEAL KIT

Genuine Yamaha OEM  Rear Suspension Linkage Relay Arm

Bearing & Seal Kit.

 

OUR PRICE £69.00

 

To buy this item click on the photo above

                 REAR CHAIN/SPROCKET GUARD

Genuine OEM Yamaha Rear Chain/Sprocket Guard better known

as a "Sharks Tooth"

 These are fitted to all of the TY250/350 Mono Bikes

 

OUR PRICE £21.70

  To buy this item click on the photo above

   TY MONO SWINGING ARM CHAIN SLIPPER

Genuine Yamaha Swinging Arm Chain

Slipper/Protector

 

OUR PRICE £38.60

 

To buy this item click on the photo above

         TY MONO REPLICA CHAIN GUARD

A Quality Aftermarket Replica Aluminium Chain Guard.

 

OUR PRICE £24.96

 

To buy this item click on the photo above
 

     TWIN-AIR TY MONO AIR FILTER

 

We have aftermarket Twin-Air Yamaha Air Filter to fit the

TY250 R / S / Z

from 1984 to 1996

These are £20.00 inc. Vat & UK P&P

To buy this item click on the photo above

   GENUINE YAMAHA TY MONO AIR FILTERS

We have Genuine Yamaha Air Filters to fit the TY250 R / S / Z

from 1984 to 1996

These are £24.30 inc. Vat & UK P&P

To buy this item click on the photo above

       REAR SHOCK ABSORBER TOP MOUNT REPAIR KIT

Brand New Yamaha TY Mono 250/350 & TYZ 250 Standard Rear

Shock Absorber Top Mount Repair Kit.

 This is the complete Kit and includes everything you need to

replace the top mounting on the Standard Rear Shock Absorber.

This kit will fit all Yamaha TY 250/350 Mono's and TYZ 250's

Standard Rear Shock Absorbers with and without remote reservoirs

from 1984 to 1995.

 

These are £32.95 Vat & UK P&P

To buy this item click on the photo above

                        YAMAHA AIR FILTER CAGE


Brand New Genuine OEM Yamaha Air Filter Cage

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992

 

OUR PRICE £11.20

 

To buy this item click on the photo above

         CTC STAINLESS STEEL OVERSIZED SNAIL CAMS

CTC Precision Laser Cut 4mm Polished Stainless Steel Oversized

Snail Cams to fit the TY250 Mono's with a 15mm spindle.

 

 OUR PRICE £20.00

To buy this item click on the photo above

 

       FIBREGLASS REAR NUMBER PLATES

Ideal for Twin-Shock or Air Cooled Mono Trials Bikes

Made from lightweight Fibreglass with a strong durable yellow gel coat exterior finish these rear plates are perfect for twin-shock or air-cooled mono trials bikes. They have been custom made to fit snuggly onto the classic shaped rear mudguard and can be attached with plastic number plate bolts or double sided foam pads if you don't want to drill holes.

These Number plates only weigh approx. 45g.

They are also available in black for the pre-65 trials bikes 

OUR PRICE £15.00

Please click on the photo above to purchase on of these

        RENTHAL 7/8 TRIALS HANDLEBARS

 Please ring 07770670696 for the most current price

             AJP 2-POT FRONT BRAKE CALIPER

AJP / Braktec 2-Pot Front Brake Caliper

 These fit all of the TY250 Mono Bikes with Disc Brake Front Wheels and are a direct replacement for the original Brembo Brake Caliper.

With this caliper there is no need to replace the original Hose or Master Cylinder.

These are £89.00 inc. Vat & Free UK P&P

To buy this item click on the photo above



       AJP 4-POT FRONT BRAKE CALIPER

We have AJP 4-Pot Front Brake Calipers to fit the Yamaha TY250 R / S  (1984 - 1992) in stock. Very good upgrade from the Standard 2-Pot Caliper found on the "Pinky"

These are £99.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

           BRAKETEC FRONT BRAKE MASTER CYLINDER

We have Braketec Front Brake Master Cylinders to fit the Yamaha TY250 R / S  (1984 - 1992) in stock. Very good upgrade from the Standard master cylinder found on the "Pinky"

These are £102.30 inc. Vat & Free UK P&P

To buy this item click on the photo above

 GENUINE DOMINO FRONT BRAKE LEVER KIT

We have Genuine Domino Front Brake lever kit to fit the Yamaha TY250R in stock.

These are for a cable operated front brake and have a 24mm fulcrum making for a lighter feel.

These lever assemblies are in a durable black finish.

These are £39.00 each inc. Vat & Free UK P&P

To buy this item click on the photo above

        GENUINE DOMINO CLUTCH LEVER KIT

We have Genuine Domino Clutch Lever kit to fit the Yamaha TY250R in stock.

These are for a cable operated Clutch and have a 24mm fulcrum making for a lighter feel.

These lever assemblies are in a durable black finish.

These are £39.00 each inc. Vat & Free UK P&P

To buy this item click on the photo above

     YAMAHA TY MONO TANK / SEAT COVER

 

 Please ring 07770670696 for the most current price

       YAMAHA TY MONO REAR MUDGUARD

 Please ring 07770670696 for the most current price

      YAMAHA TY MONO FRONT MUDGUARD

Please ring 07770670696 for the most current price 

        TY MONO VENHILL FEATHERLIGHT CLUTCH CABLE

Venhill Featherlight Clutch Cable to fit the Yamaha TY250R, TY250L & TY250Z manufactured from 1984 to 1992.

These cables are one of if not the best available with the Teflon coated inner cable liner offering very light clutch feel.

These are £24.50 each inc. Vat & Free UK P&P

To buy this item click on the photo above

 

       COMPLETE ENGINE STAINLESS STEEL BOLT, NUT,                            

Brand New Complete Engine Stainless Steel Bolt, Nut & Washer Kit (98 pcs.) for the following bikes:

YAMAHA TY 250 MONO ALL

YEARS

YAMAHA TY 350 MONO ALL

YEARS

This kit comprises of the following Nuts & Bolts:

Ignition Case Bolts & Washers

Clutch Case Bolts & Washers

Crankcase Outer Bolts & Washers

Crankcase Inner Bolts & Washers

Engine Mounting Bolts, Nuts & Washers

Cylinder Head & Barrel Nuts & Washers

Sump Plate Bolts & Washers

Stator Plate Bolts & Washers

 

These are £38.99

To buy this item click on the photo above

   PWK 26 OKO KEIHIN FLAT SLIDE REPLICA CARBURETOR

We have PWK 26 & 28 flat slide Keihin replica carburettors in stock. These are an ideal replacement and upgrade for the standard carb fitted to the Yamaha TY250R and offer better and more responsive carburation to your bike. The throttle cable will also need to be changed to fit this carb to your bike. These Venhill Custom cables are also available from us, please contact us for the cable price.

These are £99.30 each inc. Vat & Free UK P&P

To buy this item click on the photo above

                   11 TOOTH FRONT SPROCKET

Brand New Top Quality OEM Specification 11 Tooth Front Sprocket.

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992

These are £12.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

 

                        12 TOOTH FRONT SPROCKET

 

Brand New Top Quality OEM Specification 12 Tooth Front

Sprocket.

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992

These are £12.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

 

                  13 TOOTHFRONT SPROCKET

Brand New Top Quality OEM Specification 13 Tooth Front

Sprocket.

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992

These are £12.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

 

                TALON FRONT SPROCKETS

We have Talon Front Sprockets to fit the Yamaha TY250 R / S in stock.

These are 10 tooth, 520 Pitch sprockets finised in a gold zinc colour as seen in the photo above.

These are £12.95 inc. Vat & Free UK P&P

To buy this item click on the photo above

                 TALON REAR SPROCKETS

 

We have Talon Radialite (Self Cleaning) Rear Sprockets to fit the Yamaha TY250R / S in stock.

These are 35 tooth, 520 Pitch sprockets finised in a gold anodised colour as seen in the photo above.

These are £26.98 inc. Vat & Free UK P&P

To buy this item click on the photo above

REGINA 520 X 102L EXTRA GOLD LINK CHAIN

We have Regina Extra Gold Link HD Chains in stock to fit the Yamaha TY250R / S in stock.

These are 520 x 102 Link Chains.

These are £27.98 inc. Vat & Economy Delivery

To buy this item click on the photo above

          RENTHAL R1 HD 520 X 102L GOLD LINK CHAIN

We have Renthal R1 Gold Link Chains in stock to fit the Yamaha TY250R / S in stock.

These are 520 x 102 Link Chains and are probably the best chains on the market today.

These are £46.00 inc. Vat

To buy this item click on the photo above

            EBC HEAVY DUTY CLUTCH KIT

We have EBC Heavy Duty Clutch Fibre Kits to fit the Yamaha

TY250 R / S  (1984 - 1992) in stock.

These are £65.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

 

    EBC HEAVY DUTY CLUTCH SPRING SETS

We have EBC Heavy Duty Clutch Spring Kits to fit the Yamaha TY250 R / S  (1984 - 1992) in stock.

These are £14.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

       EBC GROOVED REAR BRAKE SHOES

We have EBC Grooved Rear Brake Shoes to fit the Yamaha

TY250/350 R / S in stock.

These are come as a set with two new shoe springs which are to

OEM standard

 

These are £18.30 inc. Vat & Free UK P&P

To buy this item click on the photo above

      EBC GROOVED FRONT BRAKE SHOES

We have EBC Grooved Front Brake Shoes to fit the Yamaha

TY250/350 R / S in stock.

These are come as a set with two new shoe springs which are to

OEM standard

 

These are £26.30 inc. Vat & Free UK P&P

To buy this item click on the photo above

           EBC "PINKY" FRONT DISC PADS

We have EBC Front Disc Pads to fit the Yamaha TY250R "Pinky".

These pads will only fit the 2-Pot caliper fitted to the "Pinky" and Z models

These are £18.00 inc. Vat & Free UK P&P

To buy this item click on the photo above

     GENUINE YAMAHA FORK DUST COVERS

 

 

Brand New Genuine OEM Yamaha Fork Dust Cover

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992

These dust seals are sold individually.

These are £10.50 each inc. Vat & Free UK P&P

To buy this item click on the photo above

                   TY MONO FORK SEALS

 

 

Brand New Top Quality OEM Specification Yamaha Fork Seals

 These fit all of the TY250/350 Mono Bikes from 1988 - 1992


These are £9.95 inc. Vat & Free UK P&P

To buy this item click on the photo above

GENUINE YAMAHA CYLINDER HEAD GASKET

We have Genuine Yamaha Cylinder Head Gaskets to fit the Yamaha TY250R.

These are £16.90 each inc. Vat & Free UK P&P

To buy this item click on the photo above

      GENUINE YAMAHA CLUTCH COVER GASKET

We have Genuine Yamaha Clutch Cover Gaskets to fit the Yamaha TY250R.

These are £15.70 each inc. Vat & Free UK P&P

To buy this item click on the photo above

           GENUINE YAMAHA MAGNETO COVER GASKET

We have Genuine Yamaha Magneto Cover Gaskets to fit the Yamaha TY250R.

These are £10.90 each inc. Vat & Free UK P&P

To buy this item click on the photo above

    GENUINE YAMAHA REED VALVE GASKET

We have Genuine Yamaha Reed / Crank Gaskets to fit the Yamaha TY250R.

These are £4.75 each inc. Vat & Free UK P&P

To buy this item click on the photo above

      GENUINE YAMAHA EXHAUST GASKET

 

 

We have Genuine Yamaha Exhaust Gaskets to fit the Yamaha TY250R.

These parts have now been discontinued, so when they are gone there is no more - Hurry...

These are £8.50 each inc. Vat & Free UK P&P

To buy this item click on the photo above

YAMAHA TK CARBURETOR FLOAT BOWL GASKET

 

Brand New Genuine OEM Yamaha TK Carburetor Float Bowl

Gasket

 This Float Bowl Gasket is fitted to the TK carb fitted on all of the

TY250/350 Mono Bikes

 

These are £12.50 each inc. Vat & Free UK P&P

To buy this item click on the photo above

         GENUINE YAMAHA BASE GASKET

We have Genuine Yamaha Base Gaskets to fit the Yamaha TY250R.

These are £9.22 each inc. Vat & Free UK P&P

To buy this item click on the photo above

       IRC TUBED TYPE REAR TRIALS TYRE

We have IRC Tubed Type Rear Tyres to fit the Yamaha TY250R in stock.

These are the standard 4.00 x 18 Tubed fitment.

 

These are £89.99 inc. Vat & Postage

 (This postage offer excludes Highland & Island Postcodes)

To buy this item click on the photo above

       PUTOLINE CASTOR TECH PREMIUM PRE MIX 2T OIL

We have Putoline Castor Tech 2T Pre-mix Oil in stock. This is a very high quality pre-mix racing oil that is made up of a combination of synthetic racing oils and castor oils which will give you the destinctive Castrol R smell with modern protection and lubrication. As used by CTC Pinky Riders.

These come in 1 Litre Bottles and the recommended treatment is 50:1 mix ratio (please check bike manufactures specification)

These are £19.41 per Litre inc. Vat

To buy this item click on the photo above

 

    PUTOLINE TT TRIAL PRO PRE-MIX 2T OIL

We have Putoline Synthetic TT Trial Pro 2T strawberry scented Pre-mix Oil in stock.

These come in 1 Litre Bottles and the recommended treatment is 50:1 mix ratio (please check bike manufactures specification)

These are £13.00 per Litre inc. Vat

To buy this item click on the photo above

           PUTOLINE MX9 2T PRE-MIX OIL

We have Putoline MX9 100% Synthetic Ester Based 2T Pre-mix Oil in stock.

Probably the best two stroke oil available on the market today and is very clean burning and can be diluted up to 20% leaner than other standard oils and still offer the same level of engine protection.

These come in 1 Litre Bottles and the recommended treatment is 75:1 mix ratio (please check bike manufactures specification)

These are £19.94 per Litre inc. Vat

To buy this item click on the photo above

          PUTOLINE LIGHT GEAR OIL 75W

We have Putoline 75W Light Gear Oil in stock.

This is an ideal oil for the Yamaha TY250R Gearbox.

These come in 1 Litre Bottles

These are £10.00 per Litre inc. Vat

To buy this item click on the photo above

     PUTOLINE NANO TRANS GEAR OIL 75W

We have Putoline Nano Trans 100% Synthetic Gearbox Oil with built in Nano technology in stock.

Probably the best Gearbox oil available on the market today and will actively keep your gearbox clean and reduce or eliminate clutch slip and drag whilst offering the ultimate gearbox and clutch plate protection.

This product will offer the ultimate protection for up to three times the life of standard gearbox oils.

These come in 1 Litre Bottles.

These are £20.94 per Litre inc. Vat

To buy this item click on the photo above

           PUTOLINE DOT4 BRAKE FLUID

We have Putoline DOT4 Brake Fluid in stock.

This is an ideal oil for the Yamaha TY250R fitted with front disc brakes.

These come in 1 Litre Bottles

These are £12.59 per Litre inc. Vat & Free UK P&P

To buy this item click on the photo above

 

               PUTOLINE HPX R FORK OIL

We have Putoline HPX R Fork Oil in stock.

This is an ideal oil for the Yamaha TY250R forks and comes in either 2.5W, 5W, 7.5W or 10W.

These come in 1 Litre Bottles

These are £11.50 per Litre inc. Vat

To buy this item click on the photo above

            PUTOLINE 600ML DX11 AEROSOL CHAIN LUBE

We have Putoline DX11 Synthetic Aerosol Chain Lube in stock. This is a non-fling formula chain lubricant.

This comes in a 500ml aerosol can with 20% extra free making it a 600ml can.

These are £10.49 each inc. Vat

To buy this item click on the photo above

COOLANT NF - 1 LITRE

                                         

Coolant NF 1L - New organic silicone phosphate free formula that

provides complete frost protection down to minus 38 degrees C.

Aluminium safe formula for use all year round for total corrosion

protection.

 

These are £7.33 each inc. Vat

To buy this item click on the photo above

            PUTOLINE OCTANE BOOSTER

We have Putoline Octane Booster in stock. This is a lead replacement additive designed to improve the quality of un-leaded to that of the old 2 & 4 star leaded fuel which the TY250R was designed to run on. This will eliminate pinking.

for optimum results 1 x 325ml bottle will treat up to 30 Litres of fuel

These are £10.49 each inc. Vat

To buy this item click on the photo above